Control Panels

Border Hydro BH-OGCO
Custom Control Panels
TS G59/3 Pro
TS6000/300 Control Panel

Micro-Generation Electrical Control Panels

Border Hydro TS6000 -

Suitable for Kingspan 6kW grid connect wind turbines

Dimensions W H D, 300 x 400 x 200 mm
Mains isolator (rotary, lockable in the off position)
Wind turbine isolator (rotary, lockable in the off position)
3-phase rectifier (60Amp rating)
Volt meter (analogue, easy to read)
Ammeter (analogue, easy to read)
DC cartridge fuse (complete with spare fuse)
Door interlock for added safety (switch off to open)
Pre-drilled gland plate (4 x 20mm)

Border Hydro TS15000 -

Suitable for Kingspan 15kW grid connect wind turbines

Dimensions W H D, 300 x 400 x 200mm
Wind Turbine isolator (rotary, lockable in the off position)
3-phase rectifier (60Amp rating)
Volt meter (analogue, easy to read)
Ammeter (analogue, easy to read)
DC cartridge fuse (complete with spare fuse)
Door interlock for added safety (switch off to open)
Pre drilled gland plate (4 x 20mm)

Border Hydro TSG59 Pro Control Panel

For systems that generate in excess of 16Amps per phase, G59 regulations are employed. The TSG59 Pro control panel has a lid mounted G59 relay complete with LCD readout, which automatically disconnects the embedded generator from the national grid upon a mains fault using a large 3-phase contactor. A door interlock rotary isolator adds protection and allows a user to manually disconnect their embedded generation system.
Comes with 4 x 20mm holes in the gland plate for easy connection on site. A light is mounted along side the G59 relay giving the user a quick indication as to whether the system is grid connected or not. Protects against:

Voltage - under and over
Frequency - under and over
Vector shift - 1deg increments

These panels are often used for the Kingspan 15kW grid connect wind turbines, and can be used in conjunction with the TS15000 control panel

Border Hydro TSSE1500/48

Suitable for small water turbines, up to 10kW @ 24V or 48V

Dimensions W H D, 300 x 400 x 200mm
Water Turbine isolator (latching in the off position)
3-phase rectifier (if required)
Volt meter (analogue, easy to read)
Ammeter (analogue, easy to read)
DC cartridge fuse (complete with spare fuse)
Pre-drilled gland plate (4 x 20mm)

Border Hydro's Custom Control Panel.

We design and build control panels for all manner of systems. The control panel shown here is for a 3-ph water turbine, off-grid system. Please contact us if you would like to enquire about us designing, building or installing control panels.